Acrylic and marble putty to build textures on semi-flexible supports and create 3D forms.
What it Does
, 100% acrylic polymer and marble dust putty builds flexible form and structure
, Dries to a very hard yet flexible opaque white matte finish, on supports that may be subject to some movement
, Can be used on its own, mixed with color or painted once dry Dries more slowly than other modeling pastes
, Gives minimal shrinkage
, Can be overpainted with acrylics, oils, watercolors, graphite or dry pastels
, Maintains paint adhesion, durability and archival quality
How to use it
, Fully intermixable with all Liquitex products
, Apply with knife or tool
, Tint with acrylic color to make a colored paste
, Can be handled like clay - for best results remove the lid to let some of the water slowly evaporate until you get the texture you want
, For sculptural texture, build up in thin layers (each no more than a quarter of an inch thick), allowing each to dry
, Dry slowly by covering loosely with plastic wrap to avoid shrinkage cracks
, If cracks appear, allow to dry and fill in with another thin layer of paste
, Overpaint once dry with acrylics or most other media
, To use as a slightly flexible ground - apply a thin layer to rigid surface with knife/trowel/roller, leave to dry, sand smooth and repeat if needed
, To make an absorbent ground, mix 1 part Modeling Paste to 3 parts Liquitex Gesso, apply with a trowel/roller, leave to dry, sand smooth and repeat if needed
, For paper-mache, soak paper in a 50/50 mix of Modeling Paste and Gloss/Matte Gel/Gloss Heavy Gel Can be mixed with acrylic-compatible powdered pigments or aggregates
How not to use it
, Do not use with any non-acrylic compatible media
, Drying too quickly will cause cosmetic (not structural) cracks